CAB-SS-2660X-2 Cisco Compatible Smart Serial DTE Male to LFH60 DCE Male Cable 2 ft
| Cable: | • CAB-SS-2660 |
| Length: | • 2 Feet |
| Connector 1: | • LFH60 DCE Serial Male |
| Connector 2: | • 26-PIN DTE Smart Serial Male |
| Warranty: | • Lifetime |
Welcome to the largest selection of Cisco compatible back-to-back serial crossover cables, including the CAB-SS-2660-2 shown here. These crossover cables work with popular Cisco router models 2801, 2811, 2821, 3825, 3845, 3640, 2621, 1721 and many others. The 26-PIN Male DTE Smart Serial interface is used to connect to Cisco WAN Interface Cards including WIC-2T and WIC-2A/S, while the LFH60 DCE male serial connector will interface to WIC-1T, NM-4T, and NM-4A/S cards and modules. An example would be a Cisco 2811 with a WIC-2T needing a crossover connection to a Cisco 1750 with WIC-1T. The Diablo Cable guarantee covers these compatible smart serial cables under normal use for the life of the cable.
Frame Relay Simulation
| CAB-SS-6026X |
|
Use this Crossover Cable Guide to help determine which Crossover Cables are right for your environment. Our CAB-SS-6026X cables are widely used to simulate frame relay environments in the absence of a frame relay switch. These cables feature premium connectors for a secure fit and strain relief to ensure integrity even after dozens of moves. The great part about our CAB-SS-6026X is that it replaces two cables (CAB-SS-V35MT and CAB-V35FC) for connecting routers in a back to back configuration. You acheive the same result and you don't have an extra 20 feet of cable hanging around. You can establish a basic frame relay environment using the following commands: Older Style WIC-1T DTE Side: Newer Style WIC-2T Smart Serial DCE Side: We offer these cables in many lengths from 1FT to 20FT. Here are the part numbers for this cable in different lengths: CAB-SS-6026X-1 |
| CAB-SS-2660X |
|
Our CAB-SS-2660X cables are commonly used when a dedicated frame relay environment is required. This cable has the DCE clocking on the LFH60 serial end and the DTE clocking on the smart serial side. Engineers and students use the cable when they have one of the following: 2500 Series router including the 2520, 2521 and 2522 or The opposite end of the cable (the DTE Smart Serial end) will then be used to connect to a router with a WIC-2T, WIC-2A/S, NM-16A or NM-32A. We offer the CAB-SS-2660X in lengths ranging from 1FT to 20FT. You may find these cables using the following part numbers: CAB-SS-2660X-1 |
| CAB-SS-2626X |
|
Use the CAB-SS-2626X cable to connect two routers together in back to back configuration to emulate frame relay when using a WIC-2T, WIC-2A/S, NM-16A or NM-32A interface card or module. The CAB-SS-2626X cable is a basic Smart Serial to Smart Serial cable used to replace using two cables in the lab environment (the CAB-SS-V35MT and CAB-SS-V35FC). Save yourself up to 20FT of unecessary cable in your network or lab environment by choosing from these custom back-to-back cables in the following lengths: CAB-SS-2626X-1 |
| CAB-HD60MMX |
|
Use the CAB-HD60MMX cable to connect two routers together in back to back configuration to emulate frame relay when using a WIC-1T, NM-4A/S or NM-32A/S interface card or module. The Cisco 2500 series routers including the 2520, 2521, and 2522 have native LFH60 ports on the router as well and may use this cable. The CAB-HD60MMX cable is a basic serial to serial cable used to replace using two cables in the lab environment (the CAB-V35MT and CAB-V35FC). Save yourself up to 20FT of unecessary cable in your network or lab environment by choosing from these custom back-to-back cables in the following lengths: CAB-HD60MMX-1 |
